High Density Polyethylene Blowing Geomembrane Pond Liner Sheet From China

Short Description:

Use high-quality polyethylene virgin resin, the main component is 97.5% high-density polyethylene, about 2.5% carbon black, anti-aging agents, antioxidants, ultraviolet absorbers, stabilizers and other auxiliary materials; the imported fully automated HDPE The production equipment of permeable geomembrane is made by three-layer co-extrusion technology. The products are produced in accordance with American GRI standards and ASTM test standards. The specifications are complete. The thickness of smooth and rough surfaces is 0.75mm-3.5mm, and the width can reach 3m-9m. , To meet the application requirements of environmental protection, sanitation, water conservancy, construction, municipal engineering, gardens, landscape, petrochemical, mining, salt, agriculture, and aquaculture.


Product Detail

Product Tags

HDPE Geomembrane Description

(1)Introduction:
HDPE geomembrane is produced from high density polyethylene resin by film-blowing process, adding carbon black, antioxidant, anti-aging and UV-resistance component. Now it is the most widely used products for solid waste containment (such as landfill liners), mining and water containment applications.
(2)Specification:
1. Thickness: smooth surface 0.2mm - 3.0mm, textured surface 1.0-2.0mm
2. Width: smooth surface 1m-8m, rough surface 4m-8m
3. Length: 50m-200m/ roll or as requested.
4. Material: HDPE, LDPE, LLDPE
5. Color: black, white, blue, green.
6. Optional surface: smooth surface, single surface textured, dual surfaces textured.
7. Certificates: CE, ISO9001, ISO14001.

TP9

Parameters Of HDPE Liner

Thickness: 0.1mm-6mm
Width: 1-10m

Length: 20-200m (customized)
Color: black/white/transparent/green/blue/customized

Tested Property Test Method Frequency                Minimum Average Value  
 

0.50mm

0.75mm

1.00 mm

1.50 mm

2.00 mm

2.50 mm

Thickness, (minimum average), mm   Lowest individual reading ASTM D 5199 every roll

0.50   0.425

0.750 0.675

1.00  0.90

1.50  1.35

2.00 1.80

2.50 2.25

Density, g/cm3 ASTM D 1505 90,000 kg

0.940

0.940

0.940

0.940

0.940

0.940

Tensile Strength at Break, N/mm
Strength at Yield, N/mm
Elongation at Break, %
Elongation at Yield, %
ASTM D 669  9,000 kg

13
7
700
12

20
11
700
12

27
15
700
12

40
22
700
12

53
29
700
12

67
37
700
12

Tear Resistance, N ASTM D 1004 20,000 kg

60

93

125

187

249

311

Puncture Resistance, N ASTM D 4833 20,000 kg

160

240

320

480

640

800

Carbon Black Content, % (Range) ASTM D 603*/4218 9,000 kg

2.0 - 3.0

Carbon Black Dispersion ASTM D 5596 20,000 kg

Note(1)

Note(1)

Note(1)

Note(1)

Note(1)

Note(1)

Notch Constant Tensile Load, hr ASTM D 5397, 90,000 kg

300

300

300

300

300

300

Oxidative Induction Time, min ASTM D 3895, 90,000 kg

>100

>100

>100

>100

>100

>100

Application Of HDPE Liner

1.Environmental protection projects: Anti-seepage project on garbage landfills, sewage treatment plants, power plant regulating tanks, underground foundation waterproof and anti-seepage, factory roof moisture-proof industries, hospital solid waste etc.
2.Aquaculture industry: Anti-seepage project on aquaculture ponds, intensive and factory farming ponds, fish ponds, lining of shrimp ponds, sea cucumber ring slope protection, etc.
3.Agriculture project: Anti-seepage project on reservoir, drinking water pond, impoundment pond, irrigation system seepage prevention, agricultural breeding such as pig farm septic tank etc.
4.Chemical mining industry: Anti-seepage project on the bottom lining of ash slag field, red mud pile, heap leaching tank, dissolution tank, sedimentation tank, and tailings dam etc.
5.Construction projects: Anti-seepage project on subway, underground garage, roof garden, sewage pipe, and drainage box etc.

SAFDSAGFDH

  • Previous:
  • Next:

  • Products categories