Geonet Solutions Supplier – China HDPE geonet manufacturers supply high quality&factory price HDPE geonet – LANHUA GROUP

Geotechnical net (high quality HDPE geonet factory price) is made of high density polyethylene (HDPE) and anti-ultraviolet additives. It has the characteristics of anti-aging and anti-corrosion. The use of highway and railway roadbeds can effectively distribute loads, improve the bearing capacity and stability of the foundation, and prolong the life of the foundation. Laying on the side slope of the highway can prevent a landslide, protect water and soil, and beautify the environment. Reservoir and river embankment protection laying (CSTF/W 151 wholesale HDPE geonet for sale) can effectively prevent collapse; in coastal engineering, wholesale HDPE geonet factory price produced by the China HDPE geonet manufacturers has good flexibility and permeability to buffer the impact energy of wave break.
Wholesale HDPE geonet factory price is mainly used in soft foundation treatment, roadbed strengthening, slope protection, bridge abutment reinforcement, and coastal slope protection, reservoir bottom reinforcement, and other projects. Laying wholesale HDPE geonet for sale on the road slope can prevent the rock from sliding down and cause harm to people or vehicles. He road slag can be covered by high quality HDPE geonet for sale to prevent the loss of road slag and the deformation of the roadbed and improve the stability of roadbed. Saying high quality HDPE geonet factory prices produced by the China HDPE geonet manufacturers can strengthen the pavement and prevent the development of reflection cracks. As a reinforced material in retaining wall-filling, geotextile can disperse soil stress, limit lateral displacement, and enhance stability. The stone cage made of v used for the protection of dike and rock surfaces to prevent erosion, landslide, and soil erosion.

Geotechnical net (high quality HDPE geonet) is mainly used in soft foundation treatment, roadbed reinforcement, slope protection, bridge abutment reinforcement, coastal slope protection, reservoir bottom reinforcement, and other projects. HDPE geonet factory price produced by the China HDPE geonet manufacturers laid on road slope can prevent rock sliding and avoid harm to people or vehicles; encapsulating road slag with high quality HDPE geonet factory price can prevent road slag loss and roadbed deformation and improve roadbed stability; laying HDPE geonet for sale can reinforce road surface and prevent reflection cracks from developing; high quality HDPE geonet factory price as reinforcing material in earth filling of retaining wall can disperse soil stress and limit lateral position. Shift, enhance stability; wholesale HDPE geonet for sale made of stone cages for the dam, rock surface protection, can prevent erosion, avoid landslides, and soil erosion.

1. During the construction, a small bamboo pole or a small wooden stick can be used to Pierce the whole coil of the mesh pad and pull out the mesh pad at the same time. Bamboo nails, wooden nails, or plastic nails can be used around the mat. The distance between nails is 30cm and there are 10 nails per square meter.
2. The length of nails is generally 15cm(from the ground), the loose surface should lengthen the length of nails, in the high slope laid, the length of nails used in the upper slope should be longer than the length of the lower slope.
3. Where the terrain is abrupt or complex, attention should be paid to keeping the mesh mat flat and increasing the density of nails.
4. Pay attention to the lap joint. The length of the lap joint is 2cm. Nails at the lap joint should be driven according to the situation.
5. The shape of the nail, the width of the nail top end should be greater than 2 times the diameter of the mesh cushion, so as to play a vertical repression role at the same time.
6. The sowing depth of grass seeds should be determined according to the commercial conditions of the soil and local conditions. Grass seeds should be selected as suitable for local climatic conditions. Grass seeds with long roots and developed ones should be interplanted with perennials with long roots.
7. The sowing depth of grass seeds should be in the mesh mat, so as to enhance the effectiveness of the composite protective layer.
8. After sowing grass seeds, the surface soil coverage depth should be mainly to cover the mat, do not expose the mat to the sun, in order to extend the service life. However, attention must be paid to the germination and growth of grass seeds.
9. After sowing grass seeds, the moisture content of the soil layer should be 40-50%. And in the soil surface pressure, to facilitate the germination of grass seeds.

Q: Are you trading company or manufacturer?
A: We are a OEM & ODM China factory since 2006 with the variety of geomembrane 、geotextile、drainage plate、water storage and drainage plate、composite geomembrane、 geocell、 geogrid、 plant grass grid and other geotechnical materials used in civil engineering
Q: What is the MOQ?
A: MOQ depends on our clients demands, we welcome trial order before mass production. There is also a minimum quantity requirement for trial orders. Each product is different. Please ask our customer service。
Q: How does your factory make sure the product quality?
A: First, we will prepare samples for approval, Second, after getting approval, our team will set up a process craft , and form a inside drawing to follow it. Third during production, we have FQC, IQC , IPQC and OQC to control the quality. Forth, we will final check before shipping to avoid any problem.
Q: Wonder if you accept small orders?
A: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener 98% of our small orders are fine. Please consult our customer service for details
Q: Can you send products to my country?
A: Sure we can. If you do not have your own ship forwarder, we can help you.
Q: Can you do OEM for me?
A: We accept all OEM orders, just contact us and give me your design. we will offer you a reasonable price and make samples for you ASAP.
Q: How can I place the order?
A: First sign the PI, pay deposit, then we will arrange the production. After finished production need you pay balance. Finally we will ship the Goods.